Firmware and manuals

Ver 1.08

Release Date: 04/03/2026 | Checksum: BB6C

Updated the management of the age verification device integrated into cashless 1, based on Verifone (UX700) specifications.
Updated the management of the standalone age verification device.
In Executive Price Holding/Price Display protocol, enabled the sending of differentiated information for single sales regarding cash ("CA" pricelist 0) and cashless ("DA" pricelist 1) purchases.
Added an option in the "selectepay" command to bypass age verification if parameter 2 is set to "noagecheck".
Revised timings in Executive and Slave Executive to resolve occasional protocol lockups.
Compatible with COLD interface version 6.

Ver 1.07

Release Date: Not specified | Checksum: 2C5F

Integration of the Tikkie payment system into the standard with COLD interface version 3.
Display of the open door message or quick command menu on the tablet when the slave door is opened.
Machine operation restricted to when both master and slave doors are closed.

Ver 1.06

Release Date: 19/12/2025 | Checksum: 59FB

Added the option to choose the ItemNumber format sent to MDB cashless systems.
Transaction closure timeout set to twice the maximum non-response time between cashless 1 and 2 (minimum 120 seconds).
Revised failed sale management with session closure if the cashless device does not support multi-vend.
Created Slave door open/close events sent to the cloud.
Enabled sending temperature data for third-party telemetry.

Ver 1.05

Release Date: 14/11/2025 | Checksum: 222A

Resolved error on transaction interruption request from tablet in ALWAYS IDLE mode for Cashless 1 and 2 in MDB.
Eliminated communication lockups and command loss after multiple transaction openings/cancellations.

Ver 1.04

Release Date: 18/06/2025 | Checksum: B6E6

Corrected the default status for price display bars: now set to "always on".
Included data related to the MDB bill validator in the log file.
Identified as the first official unified version (12 selections, 7 price tables, Class C).

Ver 1.03

Release Date: Not specified | Checksum: 4275

Moved the standby display bar status variable to the specific memory block for cloud access.
Ensured preservation of the "display bars off in standby" parameter during firmware updates, essential for Class C machines configured during testing.

Ver 1.02

Release Date: 19/05/2025 | Checksum: 28D2

Default prices for tables 3, 4, 5, and 6 set to 65535.
When importing cloning from 10-selection machines, prices set to 65535 are overwritten by Table 2 values for compatibility with Satispay, Paypal, and Tikkie.
Completed the correct import procedure for cloning from 10-selection models.

Ver 1.01

Release Date: 09/05/2025 | Checksum: F4BE

Updated Microchip libraries.
Added ability to cancel a transaction open in ALWAYS IDLE via the tablet interface.
Added a dedicated page in the interface for payment or cancellation, with corresponding response logic for the "selstate" command.
Increased the number of managed price lines to 200 in Price-Holding/Price-Display.
Resolved critical issue in parameter saving via DEX-UCS in EEprom memory.
Introduced modifications for importing cloning from 10-selection machines (requires version 0.27 on the source model).

Ver 1.00

Release Date: 14/01/2025 | Checksum: 8206

First official release.
Price display moved earlier in "ALWAYS IDLE" mode in MDB.
Product price display in Price Holding/Price Display before sending the price for MDB cashless systems with ALWAYS IDLE as an Executive peripheral.
Optimized data saving in EEprom by creating a job queue and using task notifications.
Added sending of faulty probe event to the Cloud.
Defined a specific memory block for Cloud variables to preserve them during firmware updates (valid for the same model only).
Updated MDB CashlessVendSession() and CardVendSession() routines with a wait cycle for the previous "VEND_REQUEST" response before sending the final status.
Prevented potential loss of synchronism between the machine and the cashless system.

main (v. 0.31)

082672

OLD GENERATION - ATTENTION MATRIX 10

Ver 0.31 Release Date: 10/12/2025 | Checksum: B0A0

Modified failed vend management with session closure if the cashless system does not support multi-vend.

Ver 0.30 Release Date: 14/11/2025 | Checksum: B751

Resolved error on transaction abort request from Tablet in ALWAYS IDLE mode for MDB Cashless1 and Cashless2 systems.
Resolved communication freeze issues (lost commands) occurring after multiple transaction open/cancel cycles.

Ver 0.29 Release Date: 18/07/2025 | Checksum: B4B5

Corrected Cashless1 and Cashless 2 Token management with credit0 parameter set to 65535.
Verification test successfully performed on CCV Edge IM15 device.

Ver 0.28 Release Date: 03/07/2025 | Checksum: 30F9

Modified tablet transaction abort request handling in ALWAYS IDLE mode.

Ver 0.27 Release Date: 07/05/2025 | Checksum: 7560

Product code variables converted to 13-character alphanumeric strings.
Added the ability to abort an open transaction in ALWAYS IDLE via tablet interaction.
New interface page added to prompt users for payment or cancellation.
Implemented a different response to the "selstate" command to manage the new abort logic.
Added cloning parameter for 10-selection models to ensure correct import into 12-selection firmware.
Increased the number of managed price lines to 200 in Price-Holding/Price-Display mode.
Eliminated issues when saving machine parameters via DEX-UCS that occasionally prevented EEprom writing.

Ver 0.26 Release Date: 06/03/2025 | Checksum: AA57

Optimized EEprom data saving by creating a job queue and using task notifications instead of semaphores.
Added Cloud reporting for faulty probe events.
Defined a specific memory block for Cloud access variables to preserve them during firmware updates of the same model.
Introduced a wait cycle in MDB CashlessVendSession() and CardVendSession() routines before sending vend results to sync with the previous command.
Updated Microchip libraries.
Removed global menu "out of service" status; now managed on individual selections.

Ver 0.25 Release Date: 10/01/2025 | Checksum: 2AFB

Corrected protected selection message (minor protection) display for slave machines.
Advanced price display in "ALWAYS IDLE" for MDB protocol.
Advanced product price display in Price-Holding/Price-Display for MDB cashless systems acting as Executive peripherals.
Added function to enable the bill validator only when a cashless system (1 or 2) is inserted.

Ver 0.24 Release Date: 17/06/2024 | Checksum: 24B0

Added custom DEX commands to enable or disable API server connections.
Added variables for FAS cloud management and event storage during connection loss.
Added commands for reading and writing these variables via Tablet Audit menu.
Increased stack memory for specific system tasks.
Modified power ON/OFF event registration at startup to prevent false positives from main board resets.
Added setting to include all LA1 blocks in EVA-DTS files regardless of actual sales.

Ver 0.23 Release Date: 14/05/2024 | Checksum: 812D

Management of Sram 47L16 memory.
Introduced "Change Low" event (EA2A) with Active/Resolved status based on tube conditions.
Added option to keep display bars off during standby (Class C).
Eliminated EPAY price overwriting (Table 2) when changing a price line in Price-Holding mode.
Resolved bug in apiServerName and apiToken variable programming.

Ver 0.22 Release Date: 24/04/2024 | Checksum: 745B

Corrected ItemNumber for slave selections sent to MDB cashless systems.

Ver 0.21 Release Date: xx/xx/xxxx | Checksum: 3F6D

Corrected bug in cloning merged selections (command 12) that caused previous settings loss.
Corrected age verification protection for Satispay and Paypal purchases.
Blocked file programming for serial number, Asset Number, location, and configuration (writepar only).
Resolved conflict between multistep and promotional messages.
Version compiled with support for 3 price tables.

Ver 0.20 Release Date: 06/11/2023 | Checksum: 89D1

Increased the number of price tables to 6 (Cash, Cashless 1, Cashless 2, Satispay, Paypal, Cash Discount).
Added parameter to choose between a single price table or differentiated tables for payment systems.
Display bar price visualization now changes automatically based on the active price table.
Added transaction code to "SINGLE VEND" notifications.
writepricemulti command replaced by the "multicommand" method for "writeprice".

Ver 0.19 Release Date: 19/09/2023 | Checksum: 7C7C

Added management for inverter PFC error (error code 12).
Implemented active error signaling via icon on the quick commands page with direct access to history.

Ver 0.18 Release Date: xx/xx/xxxx | Checksum: 4596

Added CASH SALE reporting for zero-price sales.
Modified inverter minimum speed setup.
Added machine initialization timeout at power-on.

Ver 0.17 Release Date: 11/07/2023 | Checksum: 83E6

Resolved conflict between cloud events and third-party Audit operations.
Modified tablet communication watchdog (updates on every received command).
Added clearing of unused EE2 memory areas.
Ability to store geolocation coordinates on the board.
Passing of the pressed key code (statusB variable) to the tablet for mechanical keypad management.

Ver 0.16 Release Date: 18/04/2023 | Checksum: 28EE

Modified price formatting on display bars to support 3 decimal places.
Introduced improvements to the MDB VMC-to-Changer protocol.

Ver 0.15 Release Date: xx/xx/xxxx | Checksum: 50A2

Converted semaphores to system notifications.
Added time zone to all registered events.
Coded specific error for bottle dispenser module loading.
Blocked inverter data requests during selections.
Added new debug event.
Added display bar re-initialization if the power board resets during dispensing.
Added 500-microsecond delay in ACK responses for slow MDB peripherals.
Added minimum compressor speed parameter with priority over optimal cycle time.
Added Engine command for bulk price writing in a single operation.
Corrected "Always Idle" functionality on cashless 2.
Added 5-minute timeout for transaction outcome when an MDB cashless reset occurs.
Corrected coin total display during refill (removed 16-bit limit).

Ver 0.14 Release Date: 09/02/2023 | Checksum: 5ACC

Corrected "SINGLE VEND" event reporting for zero prices.

Ver 0.13 Release Date: xx/xx/xxxx | Checksum: F97E

Corrected composition menu management logic.

Ver 0.12 Release Date: xx/xx/xxxx | Checksum: 1835

Modified timer management in EXECUTIVE module to prevent timer exhaustion in Price-Holding mode.

Ver 0.11 Release Date: xx/xx/xxxx | Checksum: 1B7C

Introduced backup copy for cashflow counters to restore data after accidental resets.

Ver 0.10 Release Date: 02/11/2022 | Checksum: 3AC0

Corrected price visualization in price-holding and price-display modes.
Added check to prevent counter resets if power-off occurs before full cash data reading.

Ver 0.09 Release Date: 11/10/2022 | Checksum: 47AD

Added Minor Protection for selections via Slave machine.
Limited menu selections to a maximum of two products.
Added Menu-related statistics to the EVA-DTS file.

Ver 0.08 Release Date: 19/09/2022 | Checksum: 4D03

Modified price retrieval from Executive systems for Televend compatibility.

Ver 0.07 Release Date: 14/09/2022 | Checksum: 205E

Modified keyboard reading routine to prevent state machine lockups.
Corrected promotional message display by clearing character count for inactive selections.

Ver 0.06 Release Date: 20/07/2022 | Checksum: 8CE3

Resolved Executive protocol lockup.
Corrected Photocell "Freeze" management with event reporting to the cloud.
Corrected low-stock management and cloud reporting for refill events.

Ver 0.05 Release Date: 08/06/2022 (14:43) | Checksum: 736E

Corrected counter block integrity check to prevent unintended resets.

Ver 0.04 Release Date: 08/06/2022 (12:31) | Checksum: DA2F

Corrected ability to remove currency symbols from shelf displays.
MDB protocol modifications to avoid lockups with Ingenico POS terminals.
Modified pre-selection management in Executive protocol.
Cleared vend request upon VEND command or timeout.
Specific adjustment for COGES engine system operating with credit cards.

Ver 0.03 Release Date: 16/05/2022 | Checksum: E4B7

Corrected "out of service" restoration for Bottle selections.

Ver 0.02 Release Date: xx/xx/xxxx | Checksum: 33FD

Completed implementation of system Menu management.

Ver 0.01 Release Date: xx/xx/xxxx | Checksum: xxxx

Resolved bug on initial shelf display setup for custom configurations.
Resolved bug found during End-of-Line test.

power (v. 0.06)

082680

TOUCH

EASY6000 PRO - TABLET

Update procedure : USB - CLOUD+

main (v. 0.23)

082672

Ver 0.23 Release Date: 12/01/2026 | Checksum: 801B

Restored the ability to add multiple products to the cart from disks in FIFO mode.

Ver 0.22 Release Date: 16/12/2025 | Checksum: EE58

Updated failed sale management with session closure if cashless does not support multi-vend.
Improved reaction time for forced opening of a delivery door, resulting in machine out-of-service and cloud notification.

Ver 0.21 Release Date: 18/11/2025 | Checksum: E00A

Resolved transaction interruption request from Tablet in ALWAYS IDLE mode for MDB Cashless1 and Cashless2.
Resolved communication blocks with the device occurring after multiple open/cancel transaction cycles.

Ver 0.20 Release Date: 05/11/2025 | Checksum: 4DE7

Updated cart management: delivery is now performed by compartment instead of selection.
Enabled combined cart management with multi-pricing per disk.

Ver 0.19 Release Date: 25/09/2025 | Checksum: 34DC

Added thermal protector management for door heaters.

Ver 0.18 Release Date: 05/09/2025 | Checksum: F38F

Updated machine total inhibition reporting to the Tablet.
Added ability to interrupt an open ALWAYS IDLE transaction via tablet interaction.
Added interface page to proceed with payment or cancel, with corresponding "selstate" command responses.
Accepted old machine model name during cloning import.
Updated positioning error management during intelligent refill with door open (prevents door from staying open).
Added compartment status to the log file (full=1, empty=0, expired=2).

Ver 0.17 Release Date: 07/03/2025 | Checksum: 41A0

Removed Timer used during initialization.
Added management for communication blocks with disk control board during initialization.
Updated disk positioning error management during cart delivery to prevent machine stalls.
Updated disk positioning error management during refill.
Delivery failure notifications are now sent only at cart closure.
Updated Microchip libraries.

Ver 0.16 Release Date: 14/02/2025 | Checksum: 6cA3

Updated MDB routines CashlessVendSession() and CardVendSession(): added wait cycle for previous command response to prevent sync loss.
Optimized EEprom data saving using a job queue and task notifications.
Defined specific memory block for cloud variables to preserve them during firmware updates.
Added minimum compressor speed parameter with priority over cycle time (requires powerboard 0.11 and interface 28).
Output Test: added management for "smart" fridge unit compressor and fan (requires powerboard 0.11).
Changed machine model name from EASY6000 to EASY6000_eVending for cloud distinction.

Ver 0.15 Release Date: 20/01/2025 | Checksum: E8FE

Added management for standalone MDB age verification (ICT DCM5) and integrated cashless 1 (requires interface 23).
Restricted "serial number", "Asset Number", "location", and "configuration" variables to single parameter programming only.
Inhibited product quantity modification (N +) in the checkout screen for disks configured as shopper.
Added variables for API server, FAS cloud connection, and offline event storage management.
Added commands for reading/writing cloud variables from the Tablet Audit menu (interface V.26).
Improved column positioning for maximum product visibility.
Updated multi-product cart delivery management for delivery door blocks (notification on interface V.26).

Ver 0.14 Release Date: 01/08/2024 | Checksum: D66B

Increased ddcmp communication timeout for event transmission to Televend.
Added ability to modify defrost end notification delay (requires Power V.0.10).

Ver 0.13 Release Date: 17/06/2024 | Checksum: D3D0

Added double status request after door movement and semaphore on temperature probe check (blocks during movement).
Updated temperature probe offset: new value = 0.

Ver 0.12 Release Date: 21/05/2024 | Checksum: D3B5

Updated G85 calculation for Eva_Dts file sent to Tablet (corrected line terminator to "\r\n").
Added Sram 47L16 memory management.
Added memory reading wait cycle before tablet communication for correct selection status after reset.
Updated SHOPPER button management to prevent command overlap.

Ver 0.11 Release Date: 12/03/2024 | Checksum: 4186

Updated debug Event loop transmission.
Notes on energy saving test (interface V.21): resumes via screen touch or credit insertion.

Ver 0.09 Release Date: 21/09/2023 | Checksum: 74C0

Added inverter PFC error management with alarm code 12 (requires interface 17).
Added active error notification upon door opening via quick command icon for direct access to error history.

Ver 0.08 Release Date: 07/09/2023 | Checksum: 0E52

Updated disk positioning in FIFO mode upon door closure to avoid empty compartments at pickup.
Added check for expiration date application: disabled if days are set to 99.

Ver 0.06 Release Date: 28/08/2023 | Checksum: 2D38

Introduced commands for machine management via third-party App (Engine).
Updated door heater control: turns off if machine temperature exceeds 12 degrees.

Ver 0.05 Release Date: 16/06/2023 | Checksum: 3A66

Updated "skip" during intelligent refill for fixed disks: no longer causes machine stall during sale.
Updated FIFO disk repositioning at the end of intelligent refill.
Re-enabled payment systems upon exiting intelligent refill.

Ver 0.04 Release Date: 12/04/2023 | Checksum: 39B7

Added disk emptying option.
Optimized intelligent refill: all disks are repositioned only at the end to speed up operations.
Compatibility with interface V.9: added minor protection icons.
Added option to extend price programming to all selections.
Added option to make the "end or retry" screen optional in the customization menu.

Ver 0.03 Release Date: 07/03/2023 | Checksum: 725F

Door heaters turn off when the door is opened.
Added parameter to keep door heaters permanently off (group 27 code 249 == 1).

Ver 0.02 Release Date: 01/02/2023 | Checksum: EB5F

Updates for direct sale management without waiting for confirmation.
Standardized behavior between single product purchase and cart.
Added selection inhibition management.

Ver 0.01 Release Date: 01/2023 | Checksum: E51E

Initial official release.

power (v. 0.11)

082076

EASY

PRO - CASHBACK - TABLET

Update procedure : USB - CLOUD+

main (v. 1.10)

082672

NEW GENERATION - ATTENZIONE MATRICE 12

Ver 1.10 Release Date: 04/03/2026 | Checksum: 56D9

Update of the COLD interface to version 6.
Modifications to the age-verification device management (Verifone UX700 and standalone).
Send differentiated information for cash ("CA") and cashless ("DA") purchases in Executive Price-Holding.
Ability to bypass age control via "selectepay" command with "noagecheck" parameter.
Timings revision in Executive and Slave Executive to resolve protocol hangs.
Software: 082672_FASPRO_56D9_V110.hex.

Ver 1.09 Release Date: 12/01/2026 | Checksum: 7D1F

Integration of Tikkie payment system with COLD interface version 3.
"Door open" message and quick commands available on tablet for Slave door opening.
Machine operation restricted to when both Master and Slave doors are closed.
Software: 082672_FASPRO_7D1F_V109.hex.

Ver 1.08 Release Date: 19/12/2025 | Checksum: AF16

Option to choose ItemNumber format for MDB cashless systems.
Transaction closure timeout set to double the max non-response time between cashless devices.
Failed sale management with session closure if multi-vend is not supported.
Slave door open/close events sent to Cloud.
Enabled temperature data in third-party telemetry.
Software: 082672_FASPRO_AF16_V108.hex.

Ver 1.07 Release Date: 14/11/2025 | Checksum: 5EE0

Resolved communication blocks during transaction cancellation in ALWAYS IDLE (MDB).
Software: 082672_FASPRO_5EE0_V107.hex.

Ver 1.06 Release Date: Not specified | Checksum: 5400

Resolved error on Master/Slave selections with minor protection device.
Software: 082672_FASPRO_5400_V106.hex.

Ver 1.05 Release Date: 19/09/2025 | Checksum: 430F

Recording of Slave machine Defrost cycles in log file.
Improved management for ALWAYS IDLE transaction interruption via tablet.
Display bar backlight ON/OFF variable moved to non-erasable memory.
Additional log file information.
Software: 082672_FASPRO_430F_V105.hex.

Ver 1.04 Release Date: 18/06/2025 | Checksum: E32B

Price display variation on bars for NAYAX UNO-8 payment system.
Software: 082672_FASPRO_E32B_V104.hex.

Ver 1.03 Release Date: 19/05/2025 | Checksum: D9F4

Default prices for tables 3-6 set to 65535.
Overwriting of 65535 prices with Table 2 data during 10-selection machine cloning.
Automatic conversion of "COLDMACHINE10" to "COLDMACHINE10L".
Completion of 10-selection machine cloning import procedures.
Software: 082672_FASPRO_D9F4_V103.hex.

Ver 1.02 Release Date: 09/05/2025 | Checksum: A482

Microchip library update.
ALWAYS IDLE transaction cancellation via tablet with dedicated UI.
Manage up to 200 price lines in Price-Holding/Price-Display.
Elimination of EEprom saving failures during DEX-UCS programming.
10-selection machine cloning support (requires version 0.17 source).
Software: 082672_FASPRO_A482_V102.hex.

Ver 1.01 Release Date: 14/01/2025 | Checksum: C3C8

DDCMP programming: PC1 blocks copy prices to all tables; LC1 for individual tables.
Earlier price display in MDB "ALWAYS IDLE".
Advance price display in Price-Holding for Executive peripherals in ALWAYS IDLE.
Bill validator activation linked to cashless 1 or 2 presence.
Optimized EEprom saving with job queue.
Faulty probe events sent to Cloud.
Protected memory block for Cloud variables during updates.
Sync loss prevention in MDB vend sessions through wait cycles.
Software: 082672_FASPRO_C3C8_V101.hex.

Ver 1.00

Release Date: 11/2024 | Checksum: 3C06

First software release.
Prototype installed in FAS.
Software: 082672_FASPRO_3C06_V100.hex.

main (v. 0.17)

082672

OLD GENERATION - ATTENTION MATRIX 10

Ver 0.21 Release Date: 09/02/2026 | Checksum: E76E

Timing modifications in Executive master/slave to resolve reported issues.
Software: 082672_FASPRO_E76E_V021.hex.

Ver 0.20 Release Date: 14/11/2025 | Checksum: 847C

Resolved MDB communication issues and command loss for ALWAYS IDLE transaction cancellation via tablet.
Software: 082672_FASPRO_847C_V020.hex.

Ver 0.17 Release Date: 07/05/2025 | Checksum: 5842

Product codes converted to 13-character alphanumeric strings.
ALWAYS IDLE transaction cancellation via tablet enabled with new UI and response states.
Added 10-selection model parameter to cloning for future 12-selection compatibility.
Increased Price-Holding/Price-Display lines to 200.
Resolved EEprom saving issues during DEX-UCS programming.
Software: 082672_FASPRO_5842_V017.hex.

Ver 0.15 Release Date: 10/01/2025 | Checksum: 261E

Advance price display in ALWAYS IDLE and Price-Holding for MDB peripherals.
Bill validator activation now requires cashless 1 or 2 presence (Interface V.61).
Software: 082672_FASPRO_261E_V015.hex.

Ver 0.14 Release Date: 14/10/2024 | Checksum: A8CB

Variables added for API server and FAS Cloud connection management.
Audit menu (V.61) commands added for Cloud variable configuration.
Option to send all LA1 blocks in EVA-DTS based on machine configuration.
ICT DCM5 standalone MDB age-verification device management (Interface V.61).
Resolved Menu selection configuration issue.
Software: 082672_FASPRO_A8CB_V014.hex.

Ver 0.13 Release Date: 12/07/2024 | Checksum: 1175

Sram 47L16 memory management.
Resolved apiServerName and apiToken programming issues.
Increased stack memory for specific tasks.
Revised power-cycle logging to prevent false mainboard reset entries.
Corrected age-restricted selection message on slave machines.
Software: 082672_FASPRO_1175_V013.hex.

Ver 0.12 Release Date: 23/02/2024 | Checksum: 1698

Resolved combined selection cloning issue (command 12) causing setting loss.
Age protection update for Satispay/Paypal (requires Interface V.49).
Restricted sensitive variables to single parameter programming only.
Promotional messages blocked during vending phases.
Corrected slave selection ItemNumber for MDB cashless.
Software: 082672_FASPRO_1698_V012.hex.

Ver 0.11 Release Date: 19/09/2023 | Checksum: 6767

Resolved Cloud and third-party Audit event conflicts.
Geolocation coordinates storage enabled on board.
CASH SALE signals enabled for zero-price vends.
Inverter PFC error management and boot initialization timeout.
Active error icon added to tablet quick commands page.
Software: 082672_FASPRO_6767_V011.hex.

Ver 0.10 Release Date: 21/04/2023 | Checksum: AE33

Notifications replaced semaphores.
Timezone added to all events.
MDB ACK delay added for slow peripherals.
Minimum compressor speed parameter (requires powerboard update).
Price display formatted to 3 decimal places.
Software: 082672_FASPRO_AE33_V010.hex.

Ver 0.05 Release Date: 20/07/2022 | Checksum: 1974

Resolved Executive protocol hang.
Corrected Photocell "Freeze" and low-stock management with Cloud events.
Software: 082672_FASPRO_1974_V005.hex.

Ver 0.01 Release Date: Not specified | Checksum: xxxx

First software emission.
Software: 082672_FASPRO_xxxx_V001.hex.

power (v. 0.06)

082680

TOUCH

LITE LIFT - TABLET

LIFT

POWER LIFT - GCD

Update procedure : USB

main (v. 0.91) L1

082670

main (v. 0.92) L2

082670

power (v. 2.15)

082638

lift (v. 0.14)

082738

POWER

SKUDO - GCD

Update procedure : USB

main (v. 0.09) L1

082672

power (v. 0.06)

082680

SKUDO

// CALDO

500T RV - LYDIA - TABLET

Update procedure : USB - CLOUD+

082827

Ver 1.11

Release Date: 20/02/26 | Checksum: F341

Management of 7 price tables implemented; this update resets all sales data.
+1
Added counters for token sales in the EVA DTS file.
Added row ID1 in events.
Extended coffee pre-infusion time to 3 seconds.
Added a 500ms delay for dispenser micro-switch verification and potential alarm 8 triggering.
Fixed alarm 17 management during instant product dispensing with espresso: the alarm now resets if non-blocking to avoid issues with subsequent drinks.
Corrected display bar updates during price programming.
Added a 1ms delay between reception and transmission in the slave serial line to fix display bar writing issues.
With blocking alarm 30, the entire installation (master + slave) is now set to out of service.
MDB Protocol: for Always Idle systems, a payment waiting screen with a cancel option is shown on the tablet after pre-selection.
MDB Protocol: corrected initialization timeout management for cashless peripherals.
EXECUTIVE Protocol: price is now displayed during selection in Price Holding mode even if the coin mech does not provide it.

Ver 1.10

Release Date: 10/04/25 | Checksum: 0AAA

Introduced layouts 3 and 4 for FAS Lydia E6 and E7 models.
Added 12-selection slave management.
Added services for testing water or powder dispensing of single ingredients in the recipe configuration section.
Changed coffee group rest position to "open".
During dispensing, the group remains closed; the rest position is reached only after the group pre-wash interval.
Removed boiler refill during energy saving mode.
Added sub-codes for alarm 117 (instant fan) to specify which solenoid valve is affected.
Automatic reset of alarm 3 if the airbreak cycle starts with the float already in position.
Reset command state machines in case of "JUST RESET" from cashless 1 during waiting.
Corrected cash-sale management for slave selections.

Ver 1.09

Release Date: 06/11/24 | Checksum: 3543

Added the option to enable or disable full transmission of LA lines in the EVA-DTS file.
Corrected MA5*INDEXPR field compilation: only price lines for used selections are now included.
Improved management of self-resetting alarms at startup.
Resolved machine lock-up when restarting with active alarm 106.

Ver 1.08

Release Date: 12/09/24 | Checksum: 97EC

Removed autonomous kit function.
New alarm 3 management: it is no longer self-resetting and requires manual intervention.
Added a shortcut in the interface to reset alarm 3.
Added sub-code 1 for alarm 3: triggered if 6 consecutive air-break micro-switch switches occur within 5 minutes without any selections.
Scheduled washes (daily or descaling) are delayed by 30s if they coincide with ongoing dispensing.
Automatic grinding adjustment now works correctly even with alarm 20 active.
Alarm 20 is now reported every time it occurs.
Descaling wash timer now supports intervals longer than 18 hours.

Ver 1.07

Release Date: 08/04/24 | Checksum: 175D

Corrected G85 calculation in evadts by always using \r\n as line terminator.
Alarm 118 now resets automatically when the air break goes from empty to full.
Added sub-codes for alarm 118: code 1 for stuck float with micro pressed, code 2 for slow water filling.
Changed volumetric counter default value to 1.2.
Updated descaling wash defaults (8h interval, 2s water time).
Implemented stepped group movement during dosing to allow 8g coffee loads.
Dosing moved to after nozzle exit to prevent espresso group filter clogging.
New automatic grinding adjustment algorithm (discards first 4s and measurements under 5 pulses).
Added nozzle alarm management during pre-washes.
Added 10s timeout for the grinding adjustment motor movement.
Corrected slave display bar visualization for custom drawer setups and parallel selections.

Ver 1.06

Release Date: 09/01/24 | Checksum: BE29

Added timezone management in events, including latitude and longitude.
Added command to read the last automatic grinding measurement.
Added minimum speed programming for the slave CO2 fridge.
Removed unnecessary android box shutdown at power-on.
Fixed slave displays not always returning to idle after a sale.
Resolved alarm 14 incorrectly appearing during sales tests without accessories.
MDB Protocol: added 500us response delay for device compatibility.
MDB Protocol: enabled banknote acceptance only when the key is inserted.
MDB Protocol: revised coin mech protocol with command retry on failure.
MDB Protocol: fixed cashless 2 remaining always idle.
MDB Protocol: fixed cashless sale cancellation when cash is inserted.
MDB Protocol: corrected freevend key usage management.

Ver 1.05

Release Date: 07/03/23 | Checksum: D8CC

Fixed currency symbol display (€, £, or none) on slave display bars.
Executive price reading from programming no longer reboots the interface.
Corrected pre-selection timeout: now triggers if the inserted amount is less than the sale price.
Revised Executive protocol and UART management to solve Televend communication issues.

Ver 1.04

Release Date: 09/02/23 | Checksum: F2A2

Fixed machine remaining in "busy" state during coin mech price reading.
Corrected selection timeout (131) and anomalies with pre-selection enabled in executive price-holding.
Added new error codes (108, 113, etc.) that stop selection execution.
Implemented alarm 118.
Added alarm 109_6 for coffee group motor brake.
Added extra information to event 131 to determine distributor status.

Ver 1.03

Release Date: 29/11/22 | Checksum: F975

Aligned slave configuration reading with spiral machines, allowing unrestricted reading in the drawer display menu.
Corrected selection number error in MDB single vend events.
Added coffee flow calculation data to the LOG file.
Fixed single vend management with Satispay.
Removed 500ms delay for DB auger stop to prevent issues with double-capacity containers.
Improved MDB compatibility with Ingenico systems.
Optimized Executive price reading for systems making continuous requests.
Separated sugar pad pre-wash from coffee group pre-wash.

Ver 1.02

Release Date: 31/05/22 | Checksum: E1E8

Updated slave configuration parameters for new electronics and smart fridge.
Resolved technical reports 220510 and 220527.

Ver 1.01

Release Date: 21/03/22 | Checksum: EDE5

Added sugar quantity check at selection time.
Added 'FAS' prefix to machineid in EVA DTS file.
Improved mixer suction routine management.
Removed alarm 10 during group pre-wash.
Fixed instant product hot water pre-wash issue.
Resolved software reports 220304 and 220316.
Added parameter for extra mixer movement time for instant products.
Important note: Clone before updating to this version.

Ver 1.00

Release Date: 10/12/21 | Checksum: 6753

Initial software version based on "Nuova Elettronica".

LYDIA

WINNINGT RV - VICTORIA - TABLET

Update procedure : USB - CLOUD+

082827

Ver 1.11

Release Date: 20/02/26 | Checksum: D08C

Management of 7 price tables (results in deletion of all sales data).
Added counters for token-based sales in the EVA DTS file.
Added ID1 row in events.
Extended coffee pre-infusion time to 3 seconds.
Added a 500ms delay for dispenser micro-switch verification and alarm 8.
Management of alarm 17 during instant product dispensing with espresso: the alarm now resets if non-blocking.
Resolved slave display bar updates during price programming.
Added a 1ms delay between reception and transmission on the slave serial line to solve display bar writing issues.
With blocking alarm 30, the entire installation (master + slave) is put out of service.
MDB: For "Always Idle" systems, a payment waiting screen with a cancel option is shown on the tablet after pre-selection.
MDB: Corrected initialization timeout management for cashless peripherals.
EXECUTIVE: In Price Holding - price display mode, the price is shown even if the coin mechanism does not provide it.

Ver 1.10

Release Date: 10/04/25 | Checksum: BC2D

Introduced layouts 3 and 4 for FAS Lydia (new E6 and E7 models).
Management for 12-selection slaves.
Added services for testing powder or water dispensing of individual recipe ingredients in the recipe configuration section.
Modified espresso group rest position to "open"; the group remains closed during dispensing and reaches the rest position after the pre-wash interval.
Removed boiler refill during energy saving mode.
Added sub-codes for alarm 117 (instant product fan) to identify the specific solenoid valve.
Auto-reset of alarm 3 if the airbreak cycle starts with the float already in position.
Reset of command state machines in case of "JUST RESET" from cashless 1 during waiting.
Corrected cash-sale reporting for slave selections.

Ver 1.09

Release Date: 06/11/24 | Checksum: 04C6

Enable/disable full transmission of EVA-DTS file LA lines.
MA5*INDEXPR fields now only include price lines for used selections.
Improved management of self-resetting alarms at startup, specifically solving machine lock-up with active alarm 106.

Ver 1.08

Release Date: 12/09/24 | Checksum: B71B

Removed autonomous kit function.
New management for alarm 3: no longer self-resetting, requires manual intervention (shortcut added to interface).
Added sub-code 1 to alarm 3: triggered by 6 consecutive air-break micro-switch switches within 5 minutes without selections.
Scheduled washes (daily, descaling) are delayed by 30s if they occur during dispensing.
Automatic grinding adjustment now works correctly during alarm 20.
Alarm 20 is now reported every time it occurs.
Descaling wash timer now handles intervals greater than 18 hours.

Ver 1.07

Release Date: 08/04/24 | Checksum: 32CB

Corrected G85 evadts calculation using \r\n as line terminator.
Alarm 118 now auto-resets when the air break goes from empty to full.
Added sub-codes for alarm 118: 1 (stuck float) and 2 (slow water filling).
Changed volumetric counter default to 1.2.
Changed descaling wash defaults (8h interval, 2s water time).
Implemented group stepping during dosing to allow for 8g coffee loads.
Dosing moved to after nozzle exit to prevent espresso group filter clogging.
New algorithm for automatic grinding adjustment (first 4s and measures below 5 pulses are discarded).
Added nozzle alarm management during pre-washes.
Added 10s timeout to the grinding adjustment motor.
Corrected slave display bar visualization for custom drawers and parallel selections.

Ver 1.06

Release Date: 09/01/24 | Checksum: 6AD6

Added timezone, latitude, and longitude management in events.
Added command to read the last automatic grinding measurement.
Added minimum speed programming for slave CO2 fridge.
Resolved unnecessary android box shutdown at machine power-on.
Slave displays now correctly return to idle after a sale.
Alarm 14 no longer triggers during sales tests without accessories.
MDB: Added 500us response delay.
MDB: Banknote enabling restricted to when a key is inserted.
MDB: Coin mechanism protocol revision (command retry on failure).
MDB: Resolved cashless 2 "always idle" issue and cancellation of cashless sale if cash is inserted.
MDB: Corrected freevend key usage.

Ver 1.05

Release Date: 07/03/23 | Checksum: E771

Resolved currency symbol display on slave bars.
Executive price reading from programming no longer reboots the interface.
Pre-selection now correctly times out if the credit is insufficient.
Revised Executive protocol and UART peripheral for Televend communication issues.

Ver 1.04

Release Date: 09/02/23 | Checksum: F260

Resolved "busy" status during coin mechanism price reading from programming.
Resolved selection timeouts and anomalies with pre-selection enabled in Executive Price-holding.
Added errors that stop selection execution (108, 113, etc.).
Implemented alarm 118.
Added alarm 109_6 (coffee group motor brake).
Added information to event 131 to determine distributor status.

Ver 1.03

Release Date: 29/11/22 | Checksum: 16A9

Aligned slave configuration reading mode with spiral machines.
Corrected selection number in MDB single vend events.
Added "Coffee flow calculation" data to the LOG file.
Resolved single vend event issue with Satispay.
Removed 500ms delay in DB auger stop to prevent issues with oversized DBs.
Improved MDB management with Ingenico systems.
Optimized price reading in Executive for systems requiring continuous polling.
Made tablet pre-wash independent of group pre-wash.

Ver 1.02

Release Date: 31/05/22 | Checksum: E495

Updated slave configuration parameters for new electronics/smart fridge.
Resolved technical reports 220510 and 220527.

Ver 1.01

Release Date: 21/03/22 | Checksum: 053A

Added sugar quantity check at the time of selection.
Added 'FAS' prefix to machineid in EVA DTS files.
Improved mixer suction routine.
Removed alarm 10 during group pre-wash.
Resolved instant product hot water pre-wash issue.
Resolved reports 220304 and 220316.
Added extra mixer movement time parameter for instant products.

Ver 1.00

Release Date: 02/02/22 | Checksum: 6601

Initial software version based on "Nuova Elettronica".

VICTORIA

300T ILLY - TABLET

Update procedure : USB - CLOUD+

main (v. 1.07)

082827

Ver 1.07

Release Date: 10/04/25 | Checksum: 7ED3

Added management for slave units with 12 selections.
Included new services in the recipe configuration section to test powder or water dispensing for individual ingredients.
Disabled automatic boiler refill during energy saving mode.
Added specific sub-codes for alarm 117 (instant product fan) to identify the involved solenoid valve.
Implemented automatic reset for alarm 3 if the airbreak cycle starts with the float already in the correct position.
Command state machine reset in case of a "JUST RESET" signal from the cashless system during the waiting phase.

Ver 1.06

Release Date: 06/11/24 | Checksum: 7ED3

Option to enable or disable the full transmission of LA lines in the EVA-DTS file.
Corrected MA5*INDEXPR field compilation: only price lines for selections currently in use are now included.
Improved management of self-resetting alarms during the machine startup phase.
Restored management for the maximum spent capsule threshold.

Ver 1.05

Release Date: 12/09/24 | Checksum: 97EC (Estimated)

New management for alarm 3: it is no longer self-resetting and requires manual intervention.
Added a shortcut in the user interface to facilitate the reset of alarm 3.
Introduced sub-code 1 for alarm 3: triggered if the air-break micro-switch switches 6 consecutive times within 5 minutes.

Ver 1.04

Release Date: 08/04/24 | Checksum: 4739

Corrected G85 parameter calculation in the EVA-DTS file by always using \r\n as the line terminator.
Alarm 118 now resets automatically once the air break is successfully filled.
Added sub-codes for alarm 118: code 1 for stuck float with micro-switch pressed, code 2 for slow water filling.
Corrected slave display bar visualization for configurations with custom drawers and parallel selections.

Ver 1.03

Release Date: 09/01/24 | Checksum: F9C8

Added management for timezone, latitude, and longitude in the event log.
Added the ability to program the minimum speed for the slave CO2 fridge.
Fixed the issue where slave displays did not always return to idle after a sale.
MDB Protocol: Introduced a 500us response delay for improved compatibility.
MDB Protocol: Banknote acceptance is now only enabled when the key is inserted.
MDB Protocol: Revised communication with the coin mechanism, including command retries on failure.
MDB Protocol: Resolved the "always idle" state for cashless 2 and fixed sale cancellation when cash is inserted.

Ver 1.02

Release Date: 07/03/23 | Checksum: F07A

Fixed the display of currency symbols (€, £, or none) on the slave unit's display bars.
Reading executive prices from the programming menu no longer causes the interface to reboot.
Corrected the pre-selection timeout: it now triggers correctly if the inserted credit is insufficient.
General revision of the executive protocol and UART serial management to resolve communication issues.

Ver 1.01

Release Date: 09/02/23 | Checksum: 933A

Resolved the persistent "busy" state during coin mechanism price reading in programming mode.
Fixed selection timeouts (131) and other anomalies when pre-selection is active in executive price-holding mode.
Implemented alarm 118.
Included additional data in event 131 to better analyze the machine status.

Ver 1.00

Release Date: 07/12/22 | Checksum: C14E

Initial base version, aligned with version 1.01 of the FAS400T MPSM model.

300TILLY

300T RV - JOY - TABLET

Update procedure : USB - CLOUD+

main (v. 1.03)

082827

JOY

400T RV - MIA - TABLET

Update procedure : USB - CLOUD+

082827

Ver 1.11

Release Date: 20/02/26 | Checksum: 7570

Management of 7 price tables implemented; please note that this will reset all sales data.
Added counters for token-based sales within the EVA DTS file.
Added the ID1 row in the event log.
Coffee pre-infusion time extended to 3 seconds.
Added a 500ms delay for dispenser micro-switch verification and alarm 8 management.
Improved alarm 17 management during instant product dispensing with espresso: the alarm now resets if non-blocking to prevent issues with subsequent drinks.
Corrected the display bar updates during price programming.
Added a 1ms delay between reception and transmission on the slave serial line to resolve display bar writing issues.
In the event of a blocking alarm 30, the entire installation (master + slave) is now set to out of service.
MDB Protocol: For "Always Idle" systems, a payment waiting screen with a cancel option is now shown on the tablet after pre-selection.
MDB Protocol: Corrected the initialization timeout management for cashless peripherals.
EXECUTIVE Protocol: In Price Holding - price display mode, the price is shown even if the coin mechanism does not provide it.

Ver 1.10

Release Date: 10/04/25 | Checksum: 7424

Introduced layouts 3 and 4 for FAS Lydia E6 and E7 models.
Added management for slave units with 12 selections.
Added services for testing powder or water dispensing for individual recipe ingredients in the configuration menu.
Changed the espresso group rest position to "open".
The group remains closed during dispensing and reaches the rest position only after the pre-wash interval.
Removed boiler refill during energy saving mode.
Added sub-codes for alarm 117 (instant fan) to identify the specific solenoid valve involved.
Implemented automatic reset for alarm 3 if the airbreak cycle starts with the float already in the correct position.
Reset command state machines if a "JUST RESET" signal is received from cashless 1 during the waiting phase.
Corrected cash-sale reporting for selections made on the slave unit.

Ver 1.09

Release Date: 06/11/24 | Checksum: ABCE

Added the option to enable or disable the full transmission of LA lines in the EVA-DTS file.
Corrected MA5*INDEXPR field compilation: only price lines for selections currently in use are included.
Improved management of self-resetting alarms during the machine startup phase.
Resolved the issue where the machine would lock up if restarted with an active alarm 106.

Ver 1.08

Release Date: 12/09/24 | Checksum: 1112

Removed the autonomous kit functionality.
New management for alarm 3: it is no longer self-resetting and requires manual intervention.
Added a shortcut in the user interface to quickly reset alarm 3.
Introduced sub-code 1 for alarm 3: triggered if the air-break micro-switch switches 6 consecutive times within 5 minutes without any selections.
Scheduled washes (daily or descaling) are delayed by 30 seconds if they coincide with ongoing dispensing.
Automatic grinding adjustment now functions correctly even when alarm 20 is active.
Alarm 20 is now reported every time it is triggered.
The descaling wash timer has been updated to handle intervals longer than 18 hours.

Ver 1.07

Release Date: 08/04/24 | Checksum: 3039

Corrected the G85 parameter calculation in evadts by always using \r\n as the line terminator.
Alarm 118 now resets automatically once the air break is successfully filled.
Added sub-codes for alarm 118: code 1 for a stuck float with the micro-switch pressed, code 2 for slow water filling.
Updated the volumetric counter default value to 1.2.
Updated descaling wash defaults (8-hour interval and 2-second water duration).
Implemented stepped group movement during dosing to support coffee loads up to 8g.
Dosing has been moved to after the nozzle exit to prevent espresso group filter clogging.
Introduced a new automatic grinding adjustment algorithm that ignores the first 4 seconds and readings below 5 pulses.
Added nozzle alarm management during pre-wash cycles.
Added a 10-second timeout for the grinding adjustment motor movement.
Corrected the slave display bar visualization for custom drawer setups and parallel selections.

Ver 1.06

Release Date: 09/01/24 | Checksum: E92A

Added management for timezone, latitude, and longitude in the event log.
Added a command to view the last measurement from the automatic grinding system.
Added the ability to program the minimum speed for the slave CO2 fridge.
Removed the unnecessary android box shutdown during machine power-on.
Fixed the issue where slave displays did not always return to idle after a sale.
Alarm 14 no longer appears incorrectly during sales tests performed without accessories.
MDB Protocol: Added a 500us response delay for improved device compatibility.
MDB Protocol: Banknote acceptance is now only enabled when the key is inserted.
MDB Protocol: Revised the coin mechanism protocol, including command retries on failure.
MDB Protocol: Resolved the "always idle" state for cashless 2.
MDB Protocol: Fixed the cashless sale cancellation process when cash is inserted.
MDB Protocol: Corrected freevend key usage management.

Ver 1.05

Release Date: 07/03/23 | Checksum: 1EB0

Fixed the display of currency symbols (€, £, or none) on the slave unit's display bars.
Reading executive prices from the programming menu no longer causes the interface to reboot.
Corrected the pre-selection timeout: it now triggers correctly if the inserted credit is less than the sale price.
Revised the executive protocol and UART serial management to resolve communication issues with Televend systems.

Ver 1.04

Release Date: 09/02/23 | Checksum: BA6D

Resolved the persistent "busy" state during coin mechanism price reading in programming mode.
Fixed selection timeouts and other anomalies when pre-selection is active in executive price-holding mode.
Added new error codes (such as 108 and 113) that immediately stop the selection process.
Implemented alarm 118.
Added alarm 109_6 for the coffee group motor braking system.
Included additional data in event 131 for better machine status analysis.

Ver 1.03

Release Date: 29/11/22 | Checksum: 25EA

Aligned the slave configuration reading process with spiral machines, removing restrictions in the drawer display menu.
Corrected the selection number in MDB single vend events.
Added coffee flow calculation data to the LOG file.
Fixed single vend event management with the Satispay system.
Removed the 500ms delay in the auger stop process, resolving issues with larger product containers.
Improved MDB communication with Ingenico terminals.
Optimized executive price reading for systems requiring continuous polling.
Separated sugar pad pre-wash from the coffee group pre-wash.

Ver 1.02

Release Date: 31/05/22 | Checksum: 7C6F

Updated slave configuration parameters for new power electronics and the smart fridge.
Resolved technical reports 220510 and 220527.

Ver 1.01

Release Date: 21/03/22 | Checksum: 115A

Added a check for the selected sugar level at the time of drink selection.
Added the 'FAS' prefix to the machine ID in the EVA DTS file.
Improved the mixer suction routine management.
Removed alarm 10 during group pre-wash cycles.
Fixed the hot water pre-wash issue for instant products.
Resolved reports 220304 and 220316.
Added a parameter for extra mixer movement time for instant products.
Note: It is recommended to clone the machine before proceeding with this update.

Ver 1.00

Release Date: 25/11/21 | Checksum: FCA4

Initial software version based on "Nuova Elettronica".

082827 ECH